Sony CMT-L7HD - Manual (Page 17)

17 GB
CD
To erase and change a character
In step 3 or 4, press TCURSOR or
CURSOR t on the remote repeatedly until the
character you want to change flashes, press
CLEAR on the remote to erase the character,
and then repeat steps 3 and 4.
To cancel labelling
Press MENU/NO on the remote.
To add a character
After step 2, press TCURSOR or
CURSOR t on the remote repeatedly to move
the cursor to the place where you want to add a
character. And then proceed to step 3.
Checking the disc titles
1
Press FUNCTION repeatedly until “CD”
appears in the display.
2
Press MENU/NO on the remote in stop
mode.
3
Press MENU + or – on the remote
repeatedly until “Name Check?”
appears, and then press ENTER/YES on
the remote.
4
Press MENU + or – on the remote
repeatedly to select a disc title stored
in the system memory between 001 and
100.
To check the current disc title
Press SCROLL on the remote in stop mode.
To pause the scrolling, press SCROLL on the
remote again.
Erasing a disc title
1
Press FUNCTION repeatedly until “CD”
appears in the display.
If “SHUFFLE” or “PROGRAM” appears in
the display, press PLAY MODE on the
remote repeatedly until both disappear.
2
Press MENU/NO on the remote in stop
mode.
3
Press MENU + or – on the remote
repeatedly until “Name Erase?”
appears, then press ENTER/YES on the
remote.
4
Press MENU + or – on the remote
repeatedly to select the disc title you
want to erase.
5
Press ENTER/YES on the remote again.
“Complete!” appears.
To erase all disc titles
Press MENU + or – on the remote repeatedly
until “All Erase?” appears in step 3, and then
press ENTER/YES on the remote twice.
To cancel erasing
Press MENU/NO on the remote during steps 1
to 4.