Sony PCG-R505JSP - Manual (Page 53)

Connecting a Parallel Port Printer
53
Connecting a Parallel Port Printer
If your notebook came with a docking station, you may connect a Windows®
compatible parallel port printer to the docking station. However, if your notebook
did not come with a docking station, see “Connecting a USB Printer” for
information on connecting a printer to your notebook.
To a parallel port printer
1 Locate the Printer port, identified by the symbol, on the docking station.
2 Plug the printer cable (supplied with the printer) into this Printer port.
3 Ensure that the Printer setting in the Sony Notebook Setup software is
properly set. See “To display the Sony Notebook Setup screen:” for more
information.
4 See the manual supplied with your printer for more information on its
installation and use
✍
Turn off the notebook before connecting peripherals. In normal use, you should turn
on the peripherals before turning on your notebook.
Connecting a Printer to the Docking Station
✍
If your printer stops functioning after resuming from a power saving mode, see
“Troubleshooting the Printer” for more information.
Power cord
Printer cable (supplied with the printer)
To
Printer