Sony SDM-M51 - Manual (Page 10)

10
Adjusting the tilt and height
This display can be adjusted within the angles shown below.
To adjust the angles, follow the procedure of the steps below.
1 Grasp the lower middle part of the display while
holding the display stand, then, tilt the LCD panel
adequately backward.
2 Grasp the lower sides of the LCD panel, then adjust
screen tilt.
3 Grasp the lower sides of the LCD panel, then adjust
screen height.
Note
When adjusting the screen tilt and height, proceed slowly and carefully,
being sure not to hit the LCD panel against the desk or the base of the
display stand.
To use the display comfortably
This display is designed so that you can set it up at a comfortable
viewing angle. Adjust the viewing angle of your display
according to the height of the desk and chair, and so that light is
not reflected from the screen to your eyes.
70°
30°
64°
40°