Sony SDM-M51 - Manual (Page 8)

8
Step 2: Connect the audio cord
Open the back cover and turn off the display before connecting.
Note
Do not open the back cover more than 90 degrees, otherwise damage may
result to the back cover or latch.
Step 3: Connect the power cord
With the monitor and computer switched off, first connect the AC
adapter and power cord to the monitor, then connect it to a power
outlet.
Step 4: Secure the cords and close
the back cover
1 Remove the cable holder.
2 Secure the cables and cords with the cable holder.
3 Close the back cover.
Bandle the cables and cords
You can bandle the cables and cords by using the supplied cord
clip.
OPEN
to audio input
to audio input of the
computer or other audio
equipment
audio cord (supplied)
OPEN
AC adapter (supplied)
to a power outlet
power cord (supplied)
to DC IN
Cable holder
Cable
holder
OPEN
Cord clip