Sony SDM-M51 - Manual (Page 7)

7
GB
Setup
Before using your monitor, check that the following accessories
are included in your carton:
• LCD display
• Power cord
• AC adapter
• HD15 (RGB) video signal cable (this cable is already
connected to the monitor)
• Audio cord (stereo miniplug)
• Cord clip (2)
• Macintosh adapter
• Windows Monitor Information/Windows Utility/Macintosh
Utility Disk
• Warranty card
• Notes for Macintosh users
• This instruction manual
Step 1: Connect the display to your
computer
Turn off the monitor and computer before connecting.
Note
Do not touch the pins of the video signal cable connector as this might
bend the pins.
x
Connecting to an IBM PC/AT or compatible
computer
x Connecting to a Macintosh or compatible
computer
Use the supplied Macintosh adapter.
* Refer to the supplied “Notes for Macintosh users” for further details.
IBM PC/AT or
compatible computer HD 15 (RGB) video
signal cable (supplied)
to VIDEO output
Macintosh adapter
(supplied)
*
HD15 (RGB) video
signal cable (supplied)
to video output
Macintosh or
compatible computer
(continued)