Sony HDR-TD30V - Manual (Page 204)

If no noise is heard when the camcorder is turned on and is in the movie/photo recording mode, the
noise is produced by the movement of the internal lens. This is not a malfunction.
Intelligent Auto is canceled.
The Intelligent Auto setting is canceled if you change the following settings:
[Smth Slw REC]
[Golf Shot]
[Tele Macro]
[
SteadyShot]
[ SteadyShot]
[Auto Back Light]
[Face Detection]
[White Balance]
[Spot Meter/Fcs]
[Spot Meter]
[Spot Focus]
[Exposure]
[Focus]
[IRIS]
[Shutter Speed]
[AGC Limit]
[AE Shift]
[White Balance Shift]
[Low Lux]
[Scene Selection]
[
Cinematone]
[Auto Wind NR]
The supplied Wireless Remote Commander does not function.
Set [Remote Ctrl] to [On]. [Details]
Insert a battery into the battery holder with the +/– polarities correctly matching the +/– marks.
[Details]
Remove any obstructions between the Wireless Remote Commander and the remote sensor.
Point the remote sensor away from strong light sources such as direct sunlight or overhead lighting.
Otherwise, the Wireless Remote Commander may not function properly.
Another DVD device malfunctions when you use the supplied Wireless Remote
Commander.
Select a commander mode other than DVD 2 for your DVD device, or cover the sensor of your DVD
device with black paper.
Back to top
Copyright 2013 Sony Corporation
204