Sony HDR-TD30V - Manual (Page 44)

Subjects that indicate a lower scale and result in adjustment failure:
Dark subjects, such as objects viewed at night
Subjects within 1.5 m (4 feet 11 1/8 inches) away from the camcorder
Plain, non-colorful subjects
Subjects that repeat the same pattern, such as rows of windows on buildings
Moving subjects
To change the language setting
You can change the on-screen displays to show messages in a specified language.
Select [Setup] [ General Settings] [Language Setting] a desired language.
To turn off the power
Close the LCD screen or press the POWER button.
To adjust the angle of the LCD screen
First open the LCD panel 90 degrees to the camcorder ( ), and then adjust the angle ( ).
Notes
Face directly towards the LCD screen from about 30 cm (11 7/8 in.) away from the screen to watch
3D movies with optimum sense of depth.
The recording date, time and condition, and coordinates (HDR-TD30V) are recorded automatically
on the recording media. They are not displayed during recording. However, you can check them as
[Data Code] during playback. To display them, select [Setup] [ Playback Settings]
[Data Code] [Date/Time].
Once the clock is set, the clock time is automatically adjusted with [Auto Clock ADJ ] and [Auto
Area ADJ] set to [On]. The clock may not be adjusted to the correct time automatically, depending
on the country/region selected for your camcorder. In this case, set [Auto Clock ADJ ] and [Auto
Area ADJ] to [Off] (HDR-TD30V).
Related topics
[ Power On By LCD ]
To set the date and time again: [ Date & Time Setting ]
Back to top
Copyright 2013 Sony Corporation
44