AMX Interface Port AXB-IRS4 - Manual (Page 3)

Table of Contents
i AXB-IRS4 IR/Serial Interface (4 Ports)
Table of Contents
Product Information .................................................................................................1
Specifications .............................................................................................................. 1
Configuration and Installation .................................................................................3
Setting the Device DIP Switch........................................................................................... 3
Setting the Carrier/BAUD DIP switch ................................................................................ 3
Positions 1-4: Carrier signal enable/disable............................................................................. 4
Position 5: RS-232/PCTouch mode ......................................................................................... 4
Positions 6-8: Baud rate setting ............................................................................................... 4
Setting the Internal Jumpers (E1 and E2) for AXlink or
RS-232 Communication ................................................................................................. 5
Removing the circuit card......................................................................................................... 5
AXlink communication.............................................................................................................. 5
RS232 communication ............................................................................................................. 5
Wiring the AXB-IRS4......................................................................................................... 6
Wiring Guidelines ..................................................................................................................... 6
Preparing/connecting captive wires ......................................................................................... 6
Using AXlink for data and power.............................................................................................. 7
Using AXlink for data and a 12 VDC power supply.................................................................. 7
Using the AXlink-to-DB-9 connector cable for a PC system .................................................... 7
Using the AXlink-to-DB-25 connector cable for a PC system .................................................. 8
Connecting an IR device .......................................................................................................... 9
Connecting a serial device ....................................................................................................... 9
Replacing the Lithium Battery ........................................................................................... 9
Programming ..........................................................................................................11
Channel Setting Commands ........................................................................................... 11
Send Commands............................................................................................................. 11
RS-232 Protocol Commands........................................................................................... 14
RS-232 Protocol Commands (IR Output)............................................................................... 14
RS-232 Protocol Commands (Channel Pulse Time).............................................................. 15
RS-232 Protocol Commands (Carrier) ................................................................................... 15
RS-232 Protocol Commands (Miscellaneous) ...................................................................... 16