Synchronising smartview multiscreen serial units, Synchronising.smartview.multiscreen.serial.units, Pc1 pc2 – Adder Technology SmartView User Manual
Page 12
Synchronising SmartView Multiscreen Serial units
Adder SmartView Multiscreen Serial units are available in two forms:
•
SVMS4-S units support a single video display
•
SVMS4-DS units support two video displays
Where more video monitors are required, you can connect two Adder
SmartView Multiscreen Serial units (of the same type) together to switch twice
the number of video and serial channels.
The various video outputs from each system are shared between corresponding
ports of the two Adder units, with their keyboard and mouse connections
going only to the master Adder unit. A synchronisation cable is then connected
between the
OPTIONS/FLASH
ports of the two Adder units (see page 18 for pinout
details).
Whenever the master Adder unit’s channel is switched, it sends a command to
the slave unit to make it do the same.
The slave unit requires the optional power adapter because it does not have
keyboard connections to either of the systems.
The SmartView Multiscreen Serial may also be synchronised together with
AdderView GEM products as their
OPTIONS
ports operate in the same way.
Use any of the standard methods to switch between channels.
A
4A
3A
2A
1A
B
4B
3B
2B
1B
C
4C
3C
2C
1C
D
4D
3D
2D
1D
OPTIONS / FLASH
OPTIONAL
POWER
INDOOR
USE ONLY
5V
1A
A
4A
3A
2A
1A
B
4B
3B
2B
1B
C
4C
3C
2C
1C
D
4D
3D
2D
1D
OPTIONS / FLASH
OPTIONAL
POWER
INDOOR
USE ONLY
5V
1A
PC1
PC2
Master
unit
Slave
unit
Synchronisation
cable
(see page 18
for cable pin-out)
Computer
systems