Sony ICD-SX700D - Manual (Page 21)

ICD-SX700 4-127-576-11(1)
21
GB
G
ett
in
g S
ta
rte
d
2
Press  or  to select “AUTO”
or “MANUAL” and press  .
When you selected “AUTO,” the clock is
automatically adjusted using the clock
in the computer connected to the IC
recorder and on which the supplied
Digital Voice Editor software is started.
When you select “MANUAL,” proceed
to the next steps.
3
Press the  or  to select
“09y1m1d,” then press  .
4
Press  or  to set the year,
month, day, hour, and minute in
sequence, then press  .
“EXECUTING….” appears and the clock
is set.
5
Press  (stop) to return to the
display of the stop mode.
Tips
Press /MENU to return to the previous
operation.
You can set the time display for the clock to
“12-HOUR” or “24-HOUR” in the menu. When
“12-HOUR” is set, “AM” or “PM” appears in the
display window.
Note
If you do not press  within one minute
of entering the clock setting data, the clock
setting mode is cancelled and the window will
return to the display of the stop mode.
To display the current time
Slide the HOLD switch in the direction of
the arrow to display the current time.



