Adjusting the speaker levels and, Balance (test tone), Adjusting the speaker levels and balance – Sony STR-DH500 User Manual
Page 24: Test tone), Inserting batteries into the remote, Press amp menu, Press or b to enter the menu, Press v / v repeatedly to select “t. tone, Press or b to enter the parameter, Level” appears on the display
24
US
Insert two R6 (size-AA) batteries in the
RM-AAU020 Remote Commander.
Observe the correct polarity when installing
batteries.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with old ones.
• Do not mix manganese batteries and other kinds of
batteries.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.
• When you replace the batteries, the remote buttons
may be reset to their factory settings. If this
happens, reassign the buttons again (page 53).
• When the remote no longer operates the receiver,
replace all the batteries with new ones.
7: Adjusting the speaker
levels and balance
(TEST TONE)
You can adjust the speaker levels and balance
while listening to the test tone from your
listening position.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
1
Press AMP MENU.
“1-LEVEL” appears on the display.
2
Press
or
b to enter the
menu.
3
Press
V/v repeatedly to select
“T. TONE”.
4
Press
or
b to enter the
parameter.
Inserting batteries into the
remote
1
2
3
4
6
7
8
0/10
ENTER
9
SYSTEM STANDBY
TV INPUT
SLEEP
DMPORT
VIDEO
BD
DVD
SAT
2CH
A.F.D.
RETURN/EXIT
MOVIE
MUSIC
MEMORY AMP MENU
CLEAR
DISPLAY
MUTING
MASTER VOL
TV VOL
D.SKIP
D.TUNING
DVD/BD
MENU
SA-CD/CD
TV
TUNER
?/1
-
5
>10/
TV ?/1
AV ?/1
TOOLS/
OPTIONS
MENU/HOME
AMP
MENU
MASTER
VOL +/–
Input
buttons
V/v/B/b,