Sony RM-TP503 - Manual (Page 17)

17 GB
Operation
By using the Learning function, it is possible for this
commander to perform learned operations. For details on
how to learn the operation codes of other components
using the Learning function, see page 29.
1
Touch FUNCTION.
The FUNCTION screen appears.
2 Touch .
When does not appear in the screen, use the JOG
DIAL to scroll the screen until it is displayed, and then
touch it.
3 Touch the appropriate area from A to J
corresponding to the learned command.
4 Touch the box containing the code you want to
send.
A mark (
■ ) appears in the box when it has already
learned a command.
Select a source that you would like to enjoy listening to in
another room. You can switch the audio output to the 2nd
AUDIO OUT on the receiver/amplifier. For details, please
refer to the operating instructions supplied with your
receiver/amplifier.
1 Touch FUNCTION.
The FUNCTION screen appears.
2
Touch .
When does not appear on the screen, use the JOG
DIAL to scroll the screen until it is displayed, and then
touch it.
3
Touch the source that you want to listen to in
another room.
The audio output on the receiver/amplifier changes.
Using a command that has
been learned Selecting a source to listen
to using SUB ROOM