Sony RM-TP503 - Manual (Page 26)

26 GB
Operation
Macro Play setting
The following is an example of how to set the command
“POWER” for SONY VTR 1 in BOX 2 of MACRO 1. Set
other commands in a similar manner.
1 Touch SETUP.
The SETUP screen appears.
2
Touch MACRO.
The setting screen for Macro Play appears.
3 Select the MACRO Number.
Select MACRO 1, MACRO 2 or MACRO 3 in which
you want to register the macro program. For example,
select MACRO 1.
The BOX Number list appears.
2
Touch DOWNLOAD.
The DOWNLOAD screen appears.
“TUNER PRESET NAME“ does not appear in the case of an
amplifier.
3
Touch to select the data you wish to download and
press:
FUNCTION NAME: Names of connected components.
TUNER PRESET NAME: Broadcast station names etc.,
memorized in receiver. This is not displayed in case
of amplifier.
CD MEMO: CD song titles or disc titles etc., from a
Sony CD changer (5/50/200/300 CD) connected to
the receiver/amplifier with CONTROL A1 cord.
Downloading starts, and the progress is displayed.
During this time, please leave the commander’s
transmitter/receiver section pointed toward the
display on the receiver/amplifier.
When downloading has finished, the DOWNLOAD
screen reappears. A long beep sound is emitted to
indicate that the downloading was successful.
If a series of short beeps is emitted, redo the
downloading procedure. If this occurs, make sure the
receiver/amplifier is turned on and that the
commander is pointing toward the receiver/amplifier
during operation.
4 Repeat step 3 to download other data.
5
Touch EXIT.
Downloading finishes and the SETUP screen
reappears.
When you touch CANCEL, the data downloaded
before you touched CANCEL will be saved.
Adjusting the Commander’s Operating Environment