Sony COM-1 - Manual (Page 17)

Pr
ep
ara
tio
n
COM-1.US.2-668-392-11(2)
17
Connection using the supplied USB cable
To  (USB)
connector
USB cable (supplied)
Notes
• If your unit is connected to your computer via the included USB cable and the computer
enters a power saving mode (such as system suspend, sleep, or hibernation), then your
unit’s battery will begin discharging.
• Do not leave the unit connected for extended periods to a notebook computer that is not
connected to AC power, because the unit may discharge the computer’s battery.
• If the unit does not automatically turn on when you connect it to your computer using
the USB cable, wait a few minutes, and then turn it on by sliding the POWER switch
down ( page 18).
• Connecting the unit via a USB hub may not work and is not supported. Connect the
USB cable directly to the computer.
• If “Auto Power Off” is set to “NO,” and the unit is connected to the AC power adaptor, a
complete charge may require 7.5 hours or longer.
• Charging may take a long time if you operate the unit while it is charging.
Continued 