Sony COM-1 - Manual (Page 22)

COM-1.US.2-668-392-12(1)
22
Note
• The unit is compatible only with the IEEE 802.11b wireless LAN standard. Both of
the IEEE 802.11b and 802.11g wireless networks may be displayed, but the unit can
connect only to networks capable of and configured for the 802.11b. Check with
the
administrator of your network for the status.
Item Options
Display Name Enter a name to describe the wireless network in
Connection Manager.
SSID The wireless network’s SSID (Service Set Identifier)
WEP/WPA Select from among “Do Not Use,” “Use WEP KEY,” or
“Use WPA-PSK.”
KEY Enter the security key of wireless network, if required. (If
you do not know the security key, contact the administrator
of your network.)
IP Address When the network provides the IP address assignment
service, the unit detects the following settings
automatically:
• IP address
• Subnet mask
• Gateway
• DNS server
You can also set these settings manually. If you must
manually enter these settings, but do not know what to
enter, contact the administrator of your network.
WEB Proxy If the unit is connected to a secured private network, such
as an office network which has a firewall to the Internet,
the unit may need to use Web proxy servers. If you are not
sure if this setting is necessary, contact the administrator of
your network.
If “Use Web Proxy” is selected, you can enter the following
settings.
If “Use Web Proxy” is not selected (default setting), the
following settings are unavailable.
• Proxy address
• Proxy port