Configuring wireless settings – Airlink101 AIC250W User Manual
Page 18
Advertising
18
7. Configuring Wireless Settings
7.1 Infrastructure Mode
Note: The following instructions describe how to setup the IP Camera in wireless
Infrastructure mode. Use this mode if you are connecting wirelessly through a wireless
router / access point. You should use a wired connection to configure the following
wireless settings before unplugging the network cable from the IP Camera.
Step 1
At the Setup Wizard, select the desired Camera from the list and click on the
Web Config button.
Step 2
Click on System Administration to enter the Web Configuration Utility.
Advertising