Airlink101 AIC250W - Manual (Page 33)

33
WPA-PSK Encryption
To enable WPA-PSK encryption, select WPA-PSK.
Preshared Key: Enter a password for the Preshared Key. (8-63 ASCII or 64 HEX
characters).
Click Save to apply the new settings.
Note: The IP Camera needs to use the identical encryption settings as the wireless
router / access point in order for it to work properly.
Advanced Setting:
Beacon Interval: Enter the desired beacon interval.
Preamble: Select long or short preamble.
Click Save to apply the new settings.