Airlink101 AIC250W - Manual (Page 24)

24
8. Web Configuration Utility
The built-in Web Configuration Utility allows you to remotely manage the IP Camera
with the ease and convenience of your Web Browser (Internet Explorer or Netscape).
Step 1 Open your Web Browser (Internet Explorer or Netscape), enter the default IP
Address of the Camera 192.168.1.240 in the Address Bar and press Enter.
Note: If you have changed the IP Address of the Camera as described in Section 5,
enter the Camera’s new IP Address instead of the default.
Step 2 Click on System Administration to enter the Web Configuration Utility.
Step 3 Enter admin for both the User name and Password or enter the new User
name and Password that you have previously specified and click OK.