Sony BDV-N8100W - Manual (Page 60)

60 US
BDV-N9100W/BDV-N8100W/BDV-N7100W
4-456-334-12(1)
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF
01)\4456334121_US (U)\090SET.fm masterpage: Left
x [TV Type]
[16:9]: Select this when connecting to a
wide-screen TV or a TV with a wide-mode
function.
[4:3]: Select this when connecting to a 4:3
screen TV without a wide-mode function.
x [Screen Format]
[Full]: Select this when connecting to a TV
with a wide-mode function. Displays a 4:3
screen picture in 16:9 aspect ratio even on
a wide-screen TV.
[Normal]: Changes the picture size to fit
the screen size with the original picture
aspect ratio.
x [DVD Aspect Ratio]
[Letter Box]: Displays a wide picture with
black bands on the top and bottom.
[Pan & Scan]: Displays a full-height
picture on the entire screen, with trimmed
sides.
x [Cinema Conversion Mode]
[Auto]: Normally select this. The main unit
automatically detects whether the material
is video-based or film-based, and switches
to the appropriate conversion method.
[Video]: The conversion method suited for
video-based material will always be
selected regardless of the material.
x [Output Video Resolution]
[Auto]: Outputs video signal according to
the resolution of the TV or connected
equipment.
[Original Resolution]: Outputs video signal
according to the resolution recorded on the
disc. (When the resolution is lower than SD
resolution, it is scaled up to SD resolution.)
[480i/576i]*, [480p/576p]*, [720p],
[1080i], [1080p]: Outputs video signal
according to the selected resolution setting.
* If the color system of your disc is NTSC, the
video signals resolution can be converted to
[480i] and [480p] only.
x [BD-ROM 24p Output]
[Auto]: Outputs 24p video signals only
when you connect a 1080/24p-compatible
TV via an HDMI connection and the
[Output Video Resolution] is set to [Auto]
or [1080p].
[On]: Select this when your TV is
compatible with 1080/24p video signals.
[Off]: Select this when your TV is not
compatible with 1080/24p video signals.
x [DVD-ROM 24p Output]
[Auto]: Outputs 24p video signals only
when you connect a 1080/24p-compatible
TV via an HDMI connection and the
[Output Video Resolution] is set to [Auto]
or [1080p].
[Off]: Select this when your TV is not
compatible with 1080/24p video signals.