Sony BDV-N8100W - Manual (Page 57)

57 US
BDV-N9100W/BDV-N8100W/BDV-N7100W
4-456-334-12(1)
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF
01)\4456334121_US (U)\080OTH.fm masterpage: Right
Oth
e
r Op
eratio
ns
Further Settings for the
Wireless System
[Secure Link]
You can specify the wireless connection to
link the main unit to the surround amplifier
using the Secure Link function.
This function can help prevent interference
if you use multiple wireless products or
your neighbors use wireless products.
1
Press HOME.
The home menu appears on the TV
screen.
2
Press B/b to select [Setup].
3
Press V/v to select [System
Settings], then press .
4
Press V/v to select [Wireless
Sound Connection], then press
.
The [Wireless Sound Connection]
display appears.
5
Press V/v to select [Secure
Link], then press .
6
Press V/v to select [On], then
press .
7
Press SECURE LINK on the rear
of the surround amplifier.
Proceed to the next Step within a few
minutes.
8
Press B/b to select [Start], then
press .
To return to the previous display,
select [Cancel].
9
After the message [Secure Link
setting is complete.] appears,
press .
The surround amplifier is linked to the
main unit and the LINK/STANDBY
indicator turns orange.
If the message [Cannot set Secure
Link.] appears, follow the on-screen
messages.
To cancel the Secure Link
function
For the main unit
Select [Off] on Step 6 above.
For the surround amplifier
Hold down SECURE LINK on the rear of
the surround amplifier until the LINK/
STANDBY indicator turns green or flashes
green.
Activating wireless
transmission between
specific units