Sony NW-S705FBLACK - Manual (Page 10)

NW-S603/S605/S703F/S705F/S706F.GB 2-887-743-13(1)
10 10
 HOLD switch
You can protect the player against
accidental operation by using the
HOLD switch when carrying it.
By sliding the HOLD switch to the
HOLD position, all operation
buttons are disabled. If you press
buttons or rotate the shuttle switch
while the HOLD function is
activated, “HOLD” appears in the
display. If you slide the HOLD switch
to the opposite position, the HOLD
function is released.
 Strap hole
This is used to attach a strap (sold
separately).
 RESET button
Resets the player by pressing the
RESET button with a small pin, etc.
For details, see  page 86.
 PLAY MODE/SOUND button
Switches the play mode ( page 27).
Press and hold this button to change
the sound quality setting.
 Headphone jack
For connecting the headphones.
Connect until it clicks into place.
If connecting the headphones
improperly, it may not sound right.
For NW-S703F/S705F/S706F users
Connect the headphone plug
securely following to the plug shape
for the headphones, and to the
orientation mark ( ) and the plug
shape for the headphone extension
cord.
When using the headphone extension
cord
Headphone
extension cord
Headphones
About the Noise Canceling function
(NW-S703F/S705F/S706F only)
The Noise Canceling function is
available only when using the
supplied headphones.
Noise Canceling does not work with
models without the Noise Canceling
function (NW-S603/S605), even if
the supplied headphones are used.
Continued 
Headphones
Table of
Cont
ents
Inde
x
Menu