Sony NW-S705FBLACK - Manual (Page 69)

 
NW-S603/S605/S703F/S705F/S706F.GB 2-887-743-13(1)

Press the  button of the player, and then start playing the
audio device.
When the synchronized recording is set, recording starts automatically
when the player detects sound from the audio device.
If no sound is detected, the player pauses recording, and when the player
detects sound again, it starts recording sound as the next song.
If no sound is detected more than 5 minutes, the player enters the
recording standby mode.
The recorded song names are labeled as “NNN_hhmm” (serial number_
hour/minute), and folder names are labeled as “NN_mmdd” (serial
number_month/day). When the current time is not set on the player,
“NNN_0000” (serial number_0000) appears. Setting the current time is
recommended ( page 50).
To stop recording
Press the  button.
If the synchronized recording is set to disable
Press the  button to start recording in step  . The player does not detect
sound from the audio device.
Press the  button to stop recording.

Hints
 To enable/disable the synchronized recording setting, see “Changing the Synchronized
Recording Settings” ( page 71).
 To switch to the recording remaining time screen, press the DISPLAY/HOME button.
Notes
 2 GB is the maximum recording capacity for a song. If a song is more than 2 GB, the part
after 2 GB will be recorded as the next song.
 You may not be able to record with the proper sound quality, depending on the audio
output level from the audio device. In case of an accessory with a record level shift
switch, you may be able to achieve the proper recording level by adjusting the record
level shift switch.
For details, see the operation guide supplied with the optional accessories for recording
with the player.
Recording
Table of
Cont
ents
Inde
x
Menu