Changing the usb connection, Setting, Usb bus powered) – Sony NW-S705FBLACK User Manual
Page 59: Usb bus powered, Changing the usb connection setting
NW-S603/S605/S703F/S705F/S706F.GB 2-887-743-13(1)
Changing the USB Connection Setting
(USB Bus Powered)
Depending on how you are using the computer, if the power supply (USB Bus
Power) is insufficient, incomplete data transfer may occur from the computer
to the player. In this case, setting the USB connection (USB Bus Powered) to
“Low-Power100mA” may improve data transfer.
to
button
DISPLAY/HOME button
to
Shuttle switch
Note
You cannot set this during the USB connection.
Press and hold the DISPLAY/HOME button until the HOME screen
appears.
Rotate the shuttle switch to select (Settings) and press the
button to confirm.
Rotate the shuttle switch to select “Advanced Settings>” and press
the button to confirm.
Rotate the shuttle switch to select “USB Bus Powered>” and press
the button to confirm.
Rotate the shuttle switch to select the desired setting and press the
button to confirm.
Low-Power100mA: Sets the power rating from computer to 100mA.
High-Power500mA: Sets the power rating from computer to 500mA.
(Default setting)
To return to the previous menu
Press the DISPLAY/HOME button.
Hints
When you connect the player to a laptop computer, we recommend to connect the
laptop computer to a power supply.
The charging time will be longer if the “USB Bus Powered” is set to “Low-Power100mA.”
Settings
Table of
Cont
ents
Inde
x
Menu