Sony RCD-W3 - Manual (Page 17)

Recording on CDR
17
Select
OPTICAL
ANALOG
5
Adjust the recording level (ANALOG IN
only), if necessary. For details, see
“Adjusting the Recording Level” on
page 18.
6
Press H .
7
Start playing the sound source you
want to record.
To pause recording
Press X. To resume recording, press the button
again or press H.
Note
Whenever you pause recording, a new track number
is added. For example, if you paused recording while
recording on track 4, the track number increases by
one on track 5 and recording continues on the new
track when recording is resumed.
To stop recording
Press x.
“BUSY”, and then “UPDATE” appear while
updating the information of the disc before
stopping the recording.
Notes
• You cannot operate the CD player section while the
deck is recording or standing by for recording with
“OPTICAL” or “ANALOG” selected with the
INPUT button.
• If you press the REC button during recording, you
can add a track (The track must be longer than 4
seconds).
• Press X when the recorder is in standby for
recording to add a silent (around 2 seconds) before
a song you are recording. The recorder
automatically enters standby again.
• This recorder uses the Serial Copy Management
System (SCMS), which allows only first-generation
digital copies to be made of premastered software
via the recorder's digital input. Therefore you may
not be able to record a CD-R or CD-RW digitally
through OPTICAL IN, depending on the content
being record.
z
REC z
Recording on a CD-R or
CD-RW disc Manually
You can start recording from the end of the
existing material.
When using the remote, set SELECT to CDR
for operations on DECK B.
To perform Synchro-Recording, see
“Recording a CD to CD-R or CD-RW disc at
Normal Speed” on page 14 or “Recording a CD
to CD-R or CD-RW disc at High Speed” on
page 15.
1
Turn on the amplifier and set the
source selector to the position for the
sound source you want to record.
2
Place a recordable CD-R or CD-RW on
DECK B.
3
Press INPUT repeatedly to select the
input connector.
To record through
DIGITAL OPTICAL
ANALOG IN
4
Press REC z .
The recorder stands by for recording.