Erasing a file, Help guide, How to use – Sony ICD-BX140 User Manual
Page 108: Troubleshooting list of topics, Icd-bx140
IC Recorder
ICD-BX140
Erasing a file
You can select a file and erase it.
Note
Once a file has been erased, you cannot retrieve it.
You cannot erase a protected file. To erase the file, release the protection first, and
then erase the file.
1. Slide the HOLD·POWER ON/OFF switch in the direction of “POWER ON/OFF” to
turn on the IC recorder, or towards the center to release the IC recorder from
the HOLD status.
The stop mode window appears.
2. Select the file you want to erase when the IC recorder is in the stop or playback
mode.
3. Erase a selected file.
When the IC recorder is in the stop mode, press and hold ERASE.
When the IC recorder is in the playback mode, press ERASE.
4. Press ERASE.
“ACCESS” appears in the display window and the selected file will be erased.
When a file is erased, the remaining files will advance so that there will be no
space between files.
Hint
To cancel erasing, press
(stop) in step 3.
To erase a part of a file, divide the file into two files first, and then proceed with
Back Back to Top
102