Monitoring sound while recording, Help guide, How to use – Sony ICD-BX140 User Manual
Page 82: Troubleshooting list of topics, Icd-bx140
Advertising
IC Recorder
ICD-BX140
Monitoring sound while recording
If you connect the headphones to the
(headphone) jack, you can monitor the
recording.
1. Connect the headphones to the
(headphone) jack.
2. Press VOL –/+ to adjust the monitoring volume.
Monitoring volume does not affect to the recording level.
Note
When the cord of the headphones touches the IC recorder while you are monitoring
the recording, the IC recorder may record a rustling noise. The rustling noise can be
reduced by holding the cord away from the IC recorder.
Related Topic
Recording sound from the built-in microphone
Back Back to Top
4-530-204-11(1)
© 2014 Sony Corporation
76
Advertising