Sony HT-CT60 - Manual (Page 14)

14 US
Operating the system
using the supplied
remote control
1
Press ?/1 to turn on the system.
2
Press one of INPUT to select the
input source.
3
Adjust the volume by pressing
VOL +/–.
To activate the muting
function
Press MUTING.
• The sound may be output from the TV’s
speaker. In this case, turn the volume of the
TV’s speaker down to minimum.
This system can create multichannel
surround sound.
Press SURROUND. Each time you press
the button, surround mode is toggled ON
or OFF. When surround mode is active,
the SURROUND indicator on the Sound
Bar is lit.
You can adjust the bass and treble level.
To adjust the treble level, press TREBLE
+/–.
To adjust the bass level, press BASS +/–.
When bass or treble is set to either
minimum or maximum, the input
indicators on the Sound Bar flash.
You can enjoy sound effects and hear the
dialog clearly even at a low volume level
(night mode). Night mode is available
only for Dolby encoded TV programs,
DVD, and Blu-ray discs
TM
.
Playback Options
Input
source Playable equipment
OPTICAL Device connected to the
OPTICAL jack
COAXIAL Device connected to the
COAXIAL jack
ANALOG Device connected to the
ANALOG jacks
?/1
INPUT
VOL +/–
SURROUND
TREBLE
+/–
BASS
+/–
MUTING
Tip
Enjoying the surround
effect
Adjusting the bass and
treble level
Enjoying sound at low
volume (night mode)