Sony HT-CT60 - Manual (Page 16)

16 US
Changing the battery
The working distance of the remote
shortens as the battery becomes exhausted.
When the remote no longer operates the
unit, replace the battery with a new
CR2025 lithium battery.
1
Push and hold the latch of the
battery holder, then pull out the
battery holder.
2
Replace the battery with the “+”
facing up, then insert the battery
holder into the slot.
Notes
• If you do not use the remote for a long period of
time, remove the battery to avoid possible
damage from battery leakage and corrosion.
• Dispose of used battery promptly. Keep the
lithium battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
• Wipe the battery with a dry cloth to assure a
good contact.
• Be sure to observe the correct polarity when
installing the battery.
• Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
• Use of batteries other than the CR2025 may
cause a fire or explosion.
Latch
+ facing up
Battery holder
CAUTION
Danger of explosion if battery is
incorrectly replaced.
Replace only with the same or
equivalent type.