Sony HT-CT60 - Manual (Page 18)

18 US
If the system still does not
operate properly after
performing the above
measures, reset the system
as follows:
Use buttons on the remote control for the
operation.
1
Press BASS +, VOL –, and
TREBLE + in that order within
three seconds.
After checking the above item and fixing
any problems, turn on the system. If the
cause of the problem cannot be found
even after checking the above item,
consult your nearest Sony dealer.
Specifications
Formats supported by this system
Digital input formats supported by this
system are as follows.
Sound Bar
Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(FTC)
Front L + Front R:
With 4 ohms loads, both channels driven,
from 230 - 20,000 Hz; rated 6 Watts per
channel minimum RMS power, with no
more than 1 % total harmonic distortion
from 250 milliwatts to rated output.
POWER OUTPUT (reference)
Front L/Front R: 15 W
(per channel at 4 ohms, 1 kHz)
Canadian models:
POWER OUTPUT (rated)
Front L + Front R: 7 W + 7 W
(at 4 ohms, 1 kHz, 1 % THD)
POWER OUTPUT (reference)
Front L/Front R: 15 W
(per channel at 4 ohms, 1 kHz)
Inputs
ANALOG
OPTICAL
COAXIAL
Front speaker unit
Speaker system
2-way speaker system, Acoustic
Suspension
Speaker unit
Woofer: 25 mm × 120 mm (1 in ×
4 3/4 in)
Tweeter: 38 mm (1 1/2 in)
cone type
Rated impedance
4 ohms
Power requirements
120 V AC, 60 Hz
Power consumption
On: 20 W
Standby mode: 0.5 W or less
Dimensions (approx.)
940 mm × 83 mm × 70 mm (37 1/8 in ×
3 3/8 in × 2 7/8 in) (with stands)
940 mm × 71 mm × 69 mm (37 1/8 in ×
2 7/8 in × 2 3/4 in) (without stands)
Format Supported/Not
supported
Dolby Digital a
Linear PCM 2ch 48 kHz
or less a