Sony DSC-M1 - Manual (Page 18)

18
Using the AC adaptor
, Connect the AC Adaptor
(supplied) to the DC IN jack of
your camera.
When placing the camera, make sure the
LCD screen is facing up.
Connect the DC plug of the AC Adaptor to
the camera with the apex of v mark on the
camera and the apex of v mark on the DC
plug facing.
• Connect the AC Adaptor to an easily accessible
wall outlet (wall socket) close by. If any trouble
occurs while using the adaptor, immediately
shut off the power by disconnecting the plug
from the wall outlet (wall socket).
, Connect the power cord (mains
lead) to the AC Adaptor and
then to a wall outlet (wall
socket).
• After using the AC Adaptor, disconnect it both
from the multi connector of the camera and
from a wall outlet (wall socket).
• The set is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet (wall socket) even if the set itself has
been turned off.
1
Multi connector
cover
AC Adaptor
DC plug
2
2 To wall outlet
(wall socket)
Power cord
(mains lead)
1
Using your camera
abroad
Power sources
You can use your camera in any country or
region with the AC Adaptor/power cord
(mains lead) (supplied) within 100 V to 240
V AC, 50/60 Hz. Use a commercially
available AC plug adaptor
[a] , if necessary,
depending on the design of the wall outlet
(wall socket)
[b] .
• Do not use an electronic transformer (travel
converter), as this may cause a malfunction.
AC-LM5/LM5A