Sony DSC-M1 - Manual (Page 76)

76
To delete shot images
When using this mode, you cannot delete
only certain frames. When you delete
images, all 16 of the frames are deleted at
the same time.
1 Display the desired Multi Burst image to
delete.
2 Press (Delete).
3 Select [Delete], then press z.
All of the frames are deleted.
Protecting images
— Protect
This function protects images against
accidental erasure.
• Note that formatting the “Memory Stick Duo”
erases all the data in the “Memory Stick Duo”
even if images are protected, and these images
cannot be recovered.
• It may take some time to protect the images.
In single-image mode
a Turn to the PLAY mode with
MODE.
b Display the image you want to
protect with
b / B .
c Press MENU.
The menu appears.
d Select - (Protect) with b / B ,
then press z .
The displayed image is protected. The
-
(protect) indicator appears on the
image.
e To continue and protect other
images, select the desired
image with
b / B , then press z .
To cancel the protection
Press z again in step 4 or 5. The -
indicator disappears.
MODE
Control button
MENU
60 min
VGA
101 2/9
Protect
Exit
BACK/NEXT