Sony DSC-V3 - Manual (Page 124)

124
Symptom Cause/Solution
Unknown pattern appears on the
fi nder. • This is due to the structure of the fi nder. This is not a malfunction.
Viewing images
Symptom Cause/Solution
Your camera cannot play back
images. • Set the mode dial to (page 42).
• The folder/fi le name has been changed on your computer (page 109).
• Playback of image fi les that have been modifi ed by a computer or images shot using other cameras
on your camera is not guaranteed.
• The camera is in USB mode. Cancel USB communication (pages 105 and 116).
The image appears rough right after
playback starts. • The image may appear rough right after playback starts due to the image processing. This condition
is not a malfunction.
The image does not appear on the TV
screen. • The video output signal setting of your camera in the SET UP settings is incorrect. Change the
setting (pages 51 and 142).
• The connection is not correct. Check the connection (page 44).
• The USB jack is connected. Follow the procedure of the note

on page 105 (Windows) or
 on
page 116 (Macintosh) and disconnect the USB cable.
The image cannot be played back on
a computer. • See page 125.
Deleting/Editing Images
Symptom Cause/Solution
Your camera cannot delete an image. • The image is protected. Cancel the protection (page 87).
• The write-protect switch on the “Memory Stick” is set to the LOCK position. Set the switch to the
recording position (page 144).
You have deleted an image by
mistake. • Marking  (protect) will prevent you from deleting images by mistake (page 87).
• Set the write protect switch of the “Memory Stick” to the LOCK position to prevent accidental
erasure (page 144).
The resizing function does not work. • You cannot resize movies, Multi Burst images, RAW data fi les, and compressed (TIFF) images.