Sony DSC-V3 - Manual (Page 37)

37
Shooting still images
• The image through the fi nder does not indicate
the actual recordable range. This is due to
parallax. To confi rm the recordable range, use
the LCD screen.
• Just as with the AE/AF lock indicator on the
LCD screen, when the AE/AF lock lamp of the
fi nder section stops fl ashing and remains on,
you can start shooting (page 30).
• When the LCD screen is turned off:
– The digital zoom does not function (page 31).
– [AF Mode] is set to [Single] (page 68).
– If you press (Flash mode)/
(Self-timer)/
(Macro), the image will be displayed
on the LCD screen for approximately two
seconds so you can check or change the
setting.
• When shooting/viewing movies, the status of
the LCD screen changes as follows: Indicators
off
 LCD screen off  Indicators on
• For a detailed description of the indicators, see
page 149.
• For a detailed description of the histogram, see
page 62.
• This setting is maintained even when the power
is turned off.
Inserting the date and time
on a still image
1
2
1
2
1
SELECT
Camera 1
AF Mode:
Digital Zoom:
Date/Time:
Red Eye Reduction:
Hologram AF:
Auto Review:
Single
Smart
Off
Off
Auto
Off
 Set the mode dial to SET UP.
The SET UP screen appears.
• When images are shot with the date and time
superimposed, the date and time cannot be
removed later.
• The date and time are not inserted in Multi
Burst mode.
• The date and time do not appear on the LCD
screen during shooting, instead, indicator
appears on the LCD screen. The actual date
and time appear in red on the lower-right
corner during playback only.
2
Day&Time
Date
Off
Camera 1
AF Mode:
Digital Zoom:
Date/Time:
Red Eye Reduction:
Hologram AF:
Auto Review:
2
1
2
1
 Select
1
(Camera 1) with
 on
the control button, then press
.
Select [Date/Time] with
/,
then press
.