Sony DSC-V3 - Manual (Page 95)

95
Still image printing
Having images
printed at a shop
Note the following items when
having images printed at a
shop.
• Contact the print service shop to
determine what recording medium types
are supported.
• When using a print service shop that
does not support “Memory Stick” or CF
card, copy the images to a CD-R, etc.,
and bring that to the shop instead.
• Be sure to make a backup copy of the
data before using a print service shop.
Marking print marks
Marking images you want to have printed
beforehand with print marks is convenient
when having images printed at a print
service shop.
MENU Mode dial
Control button
• You cannot mark movies or images recorded in
RAW mode.
• When you mark images shot in Multi Burst
mode, all the images are printed on one sheet
divided into 16 panels.
• If you mark an image shot in TIFF mode with
a print (DPOF) mark, only the uncompressed
(TIFF) image is printed, and the JPEG image
recorded at the same time is not printed.
• You cannot set the number of prints.
Marking print marks in
single-image mode
 Set the mode dial to .
 Display the image you want to
mark with
/.
 Press MENU.
The menu appears.
 Select
(DPOF) with
/,
then press
.
The mark is marked on the
displayed image.
1M 60min
101 2/9
DPOF
Exit
BACK/NEXT
 To continue and mark other
images, display the desired
image with
/, then press .
To unmark the mark
Press
 again in step  or . The
mark disappears.