Using the self-timer, 2 select still mode, 3 click the options button – Sony PCG-C1VN User Manual
Page 41: 5 click ok
VAIO® C1 PictureBook™ Notebook User Guide
40
6
Half-press the CAPTURE button on the computer. The image remains still
for a few seconds. To display another image, release the CAPTURE button
and press again.
7
Fully press the CAPTURE button. The still viewer window opens and the
captured still image appears in the still viewer window.
8
For more detailed information about the capture software, refer to the online
Help for Smart Capture.
Using the Self-timer
You can take a still image 10 seconds after clicking the CAPTURE button by
using the self-timer.
1
Click Still Viewer/Movie Player from the switch applications list.
2
Select Still mode.
3
Click the Options button.
The Still Image Options dialog box appears.
4
Click Self-timer capture on the Capturing mode tab.
5
Click OK.
✍
If you turn the lens toward you, Smart Capture goes into mirror mode. You can use the
mirror mode to take a still image of yourself. A mirror-image appears in the finder
window of the display while shooting; however, after capturing, a normal image
appears.
You can capture the following still image sizes: 640 Ч 480, 320 Ч 240, 160 Ч 120, and
80 × 60.
✍
You can adjust the sound quality for different sound environments. Click Start, point to
Settings, and then point to Control Panel. Click Sounds and Multimedia and then
Audio tab. Click Volume under the Sound Recording category. Adjust the volume level
with the microphone slider.