Sony KLV-21SR2 - Manual (Page 18)

18
Installing and Connecting the TV
Connecting a Digital Satellite Receiver
Disconnect all power sources before making any connections.
1
Using a component video cable, connect the Digital Satellite Receiver’s
Y, P
B
and P
R
jacks to the Y, P
B
and P
R
jacks on the TV. Use the VIDEO 3
IN connections.
Note
This TV supports only the 480i and 480p signal format. If the TV receives a signal other
than 480i or 480p, “Non Supported Video Format” appears on the screen.
2
Using an AUDIO cable, connect the Digital Satellite Receiver’s AUDIO
OUT jacks to the TV’s AUDIO IN jacks.
Note
The Y, P
B
and P
R
jacks do not provide audio, so audio cables must be connected to
provide sound.
VIDEO OUT
TYPE
1
L1 L2
Y
Pb
Pr R1
AUDIO OUT
OPTICAL
DIGITAL
AUDIO
OUT
R2
2
COMPONENT OUT
(1080i/720p/480p/480i)
S VIDEO
OUT
Rear of TV
Digital Satellite
Receiver
(e.g. SAT-HD200,
SAT-HD300, etc)
AUDIO cable
(not supplied)
Component
video cable
(not supplied)
P
R
P
B
Y
AUDIO-R
(red)
AUDIO-L
(white)