Connecting a digital tv receiver – Sony KLV-21SR2 User Manual
Page 19
19
Installing and Connecting the TV
Connecting a Digital TV Receiver
Disconnect all power sources before making any connections.
1
Using a component video cable, connect the Digital TV receiver’s Y, P
B
and P
R
jacks to the Y, P
B
and P
R
jacks on the TV. Use the VIDEO 3 IN
connections.
Note
This TV supports only the 480i and 480p signal format. If the TV receives a signal other
than 480i or 480p, “Non Supported Video Format” appears on the screen.
2
Using an AUDIO cable, connect the Digital TV receiver’s AUDIO OUT
jacks to the TV’s AUDIO IN jacks.
Note
The Y, P
B
and P
R
jacks do not provide audio, so audio cables must be connected to
provide sound.
Component
video cable
(not supplied)
Digital TV receiver
AUDIO cable
(not supplied)
Rear of TV
P
R
P
B
Y
AUDIO-R
(red)
AUDIO-L
(white)