ATEN CS-1762 - Manual (Page 35)

Chapter 4. Hotkey Operation
27
Mouse Emulation Control
The default setting is enabled. To disable, do the following:
1. Invoke HSM (see page 22 ).
2. Press [M].
This procedure is a toggle. Repeat to enable.
Mouse Port-switching
The Mouse Port-switching function can be enabled or disabled. The default
setting is disabled. To enable, do the following:
1. Invoke HSM (see page 22).
2. Press [W] [Enter].
This procedure is a toggle. Repeat to disable.
Note: The feature is only supported when mouse emulation is enabled. See
Mouse Emulation Control, above.
Other OS Mode
To reset keyboards and mice under operating systems that do not support USB
2.0, do the following:
1. Invoke HSM (see page 22).
2. Press [F1].