Adjusting sound fields – Sony RM-TP501 User Manual
Page 17
17
Operation
Adjusting Sound Fields
Sound fields can be adjusted with the following 3 items:
• EQ EDIT (frequency band adjustments)
• SURROUND EDIT (surround parameter adjustments)
• LEVEL (speaker volume adjustments)
For details on what can be adjusted, refer to the operating
instructions supplied with the receiver.
To adjust the frequency bands
1
Touch EQ EDIT on the SOUND FIELD screen.
The EQ EDIT screen appears.
2
Select the item that you wish to adjust (output
speaker, sound range, frequency, or gain).
3
Touch
or
to adjust to the desired
value.
4
Repeat steps 2 and 3 when there is more than one
item that you wish to adjust.
To display other items, use the JOG DIAL or touch
4
or
$ to scroll through the list.
5
Touch EXIT when adjustment is finished.
Notes
• Items that cannot be adjusted due to the current speaker
settings or sound field mode are grayed out.
• If the alarm sounds, or all items appear to be grayed out, touch
RELOAD.
Output speaker
BASS: low range
MID: mid range
TREBLE: high range
GAIN: gain adjustment
FREQUENCY: frequency
adjustment
To adjust the surround parameters
1
Touch SURR EDIT on the SOUND FIELD screen.
The SURROUND EDIT screen appears.
2
Adjust as desired.
EFFECT: Higher values increase the “presence” of the
surround effect.
WALL TYPE: Use to simulate different sonic
environments.
REVERB TIME: Use to control the spacing of the early
reflections.
LFE MIX LEVEL: Touch
or
to select the desired
value.
D.RANGE COMPRESSOR: Touch
or
to select
the desired value.
3
Touch EXIT when adjustment is finished.
Notes
• Items that cannot be adjusted due to the current speaker
settings or sound field mode are grayed out.
• If the alarm sounds, or all items appear to be grayed out, touch
RELOAD.