Sony RM-TP501 - Manual (Page 20)

20
Operation
2 Touch DOWNLOAD.
The DOWNLOAD screen will appear.
3 Touch to select the data you wish to download and
press:
FUNCTION NAME: Names of connected components.
TUNER PRESET NAME: Broadcast station names etc.,
memorized in receiver.
CD MEMO: CD song titles or disc titles etc., from a
Sony CD changer (5/50/200 CD) connected to
receiver with CONTROL A1 cable.
Downloading starts, and the progress is displayed.
During this time, please leave the commander’s
transmitter/receiver section pointed toward the
display on the receiver.
When downloading has finished, the DOWNLOAD
screen returns. A long beep sound will be emitted if
downloading has been carried out properly.
If a series of short beeps is emitted, please redo the
download procedure. If this occurs, make sure the
receiver is turned on and that the commander is
pointing toward the receiver during operation.
4 Repeat step 3 when downloading other data.
5
Touch EXIT.
Download finishes and the SETUP screen appears.
FUNCTION screen setup
Up to 11 components can be displayed on the FUNCTION
screen. Only connected components will appear on the
FUNCTION screen.
1
Touch SETUP.
The SETUP screen will appear.
2 Touch FUNCTION HOOK UP.
The FUNCTION HOOK UP screen will appear.
3 Select the function not to be displayed and touch
NO.
To display other items, use the JOG DIAL or touch
4
or $ to scroll through the list.
The selected component is set to not appear and the
SETUP screen appears.
To display the components set not to display
Touch YES instead of NO is step 3.
z
Components that have been registered (see page 19) are set
to “YES” automatically.
Downloading receiver data
Various types of data can be downloaded from the
receiver.
When carrying out this operation, make sure that the receiver’s
power is on, and be sure to point the commander’s transmitter/
receiver section toward the display on the receiver. Also, operate
the commander at a distance of about 1~2 meters from the
receiver.
1
Touch SETUP.
The SETUP screen will appear.
Adjusting the Commander’s Operating Environment
When you touch CANCEL, the data downloaded
before you touched CANCEL will be saved.