Warning – Sony LBT-LCD7Di User Manual

Page 2

Advertising
background image

MHC-GZR33Di/LBT-LCD7Di.GB.4-143-233-12(1)



GB

WARNING

To reduce the risk of fire or electric shock,

do not expose this apparatus to rain or

moisture.

To reduce the risk of fire, do not cover the

ventilation opening of the apparatus with

newspapers, tablecloths, curtains, etc.

Do not place the naked flame sources such

as lighted candles on the apparatus.
To reduce the risk of fire or electric shock,

do not expose this apparatus to dripping

or splashing, and do not place objects

filled with liquids, such as vases, on the

apparatus.
As the main plug is used to disconnect

the unit from the mains, connect the unit

to an easily accessible AC outlet. Should

you notice an abnormality in the unit,

disconnect the main plug from the AC

outlet immediately.
Do not install the appliance in a confined

space, such as a bookcase or built-in

cabinet.
Do not expose batteries or apparatus with

battery-installed to excessive heat such as

sunshine, fire or the like.
The unit is not disconnected from the

mains as long as it is connected to the

AC outlet, even if the unit itself has been

turned off.
Excessive sound pressure from earphones

and headphones can cause hearing loss.

CAUTION

The use of optical instruments with this

product will increase eye hazard.

This appliance is classified as a CLASS 1

LASER product. This marking is located

on the rear exterior.

Notice for customers: the following

information is only applicable

to equipment sold in countries

applying EU directives.

The manufacturer of this product is Sony

Corporation, 1-7-1 Konan Minato-ku,

Tokyo, 108-0075 Japan. The Authorized

Representative for EMC and product safety

is Sony Deutschland GmbH, Hedelfinger

Strasse 61, 70327 Stuttgart, Germany. For

any service or guarantee matters, please

refer to the addresses given in separate

service or guarantee documents.

This symbol is intended

to alert the user to the

presence of uninsulated

“dangerous voltage”

within the product’s

enclosure that may be

of sufficient magnitude

to constitute a risk

of electric shock to

persons.

This symbol is intended

to alert the user to the

presence of important

operating and

maintenance (servicing)

instructions in the

literature accompanying

the appliance.

Advertising