Sony LBT-LCD7Di - Manual (Page 35)

MHC-GZR33Di/LBT-LCD7Di.GB.4-143-233-12(1)
 GB
G
etting S
tar
ted
Using the “THEATRE
SYNC” function
THEATRE SYNC allows you to turn on
your Sony TV and this system, changes
the system’s function to “DVD” and then
switches the TV’s input source you have
set with just one button.
Preparing to use the “THEATRE
SYNC” function
Register the TV’s input source connected
to this system.
To select the TV’s input
Press the following buttons while holding
down SLEEP.
Press TV’s input source
0 No input source
(Default)
1 to 8 VIDEO 1 to VIDEO 8
9 COMPONENT 1
CLEAR COMPONENT 2

COMPONENT 3
+ COMPONENT 4
The selected TV’s input source is
memorized into the remote.
Operating the “THEATRE SYNC”
function
Keep the remote pointed in the
direction of the TV until the TV is
turned on and the input source
is changed correctly, then press
THEATRE SYNC.
If this function does not work, change the
transmission time. The transmission time
varies depending on the TV.
To change the transmission time
Press the following buttons while holding
down .
Press Transmission time
(seconds)
1 0.5 (Default)
2 1
3 1.5
4 2
5 2.5
6 3
7 3.5
8 4
Note
This function is only for Sony TV series,
however, some TV products may also not work.