Anschutz 9003 - Manual (Page 7)

21
can also impair the accuracy of the manometer.
2. Filled compressed air cylinders must not
be exposed to temperatures of more than 50
°
Celsius/120 ° Fahrenheit. Therefore make
sure during transport or storage that the rifle
is protected against heat, for example by
storing it in the Styrofoam packing or by using
a gun case. In planes, for mail despatch, etc.
compressed air cylinders are only transported
when they are not filled.
3. To empty the compressed air cylinder we
recommend to use our air release screw
(Order-No. 711.3408). After approximately
20 refills of the compressed air cylinder it
should be emptied completely to get rid off
possible condensed water.
4. Compressed air cylinders which are leaky,
defective or older than 10 years must be
emptied and must not be used and filled
anymore. After 10 years from the date of
manufacture the compressed air cylinder must
be checked by the manufacturer for a fee.
The date of manufacture can be seen from
the compressed air cylinder.
5. Compressed air cylinders and refill bottles
must be stored in a dry, dust and grease/oil
free place. The refill adapter is additionally
equipped with an air filter against pollution
and dust particles.
6. Protect valves and threads with the
corresponding caps when you have removed
the compressed air cylinder. Never grease
or oil the valves or threads of the compressed
air cylinder. Danger of explosion!
7. Compressed air cylinders must not be filled
with more than 200 bar (2,790 psi) at room
temperature. This maximum filling quantity must
not be exceeded at no circumstances. Only
use compressed air free of oil or water
(DIN EN 12021 - inhaled air). According to
legal regulations we only deliver unfilled
compressed air cylinders.
8. Never try to open a compressed air
cylinder yourself or to carry out mechanic
modifications. Protect your compressed air
cylinder against external force.
9. Apart from the notes above the technical
rules of your country with regard to the filling
of compressed air cylinders must be
observed. The compressed air cylinders are
not suitable for the transport of gases of any
kind.
Liability
1. ANSCHÜTZ does not assume any
responsibility, guarantee or payment of
damage claims for damages of any kind
resulting from the disregard of these instruc-
tions, non-qualified treatment or repair,
modification of parts, the use of non-original
ANSCHÜTZ spare parts, incorrect handling
or care, negligence, removal of the knot
varnish or unauthorized modifications.
2. The wood of the stock or grip as well as
the PRO grip equipment have been very care-
fully checked by factory inspectors prior to
shipment and has been determined to be free
of defects. Certain kinds of abuse, such as a
dropping or falling down can cause damage
to the wood or the PRO grip equipment, for
which the owner is solely responsible. We
also assume no responsibility for defects
resulting from inappropriate transportation
(mail, plane, etc.). Please immediately contact
your forwarder without delay in such a case
and make your claims in written form.
3. Changes, alterations or manipulations to
this product or any of its parts are prohibited
and might infringe firearms regulations. Such
changes or alterations can significantly impair
the safe use of our product and can lead to
accidents involving severe or even fatal bodily
injuries. Any product warranty will
automatically lapse in case changes or
alterations are implemented. Users are
requested to carefully inspect the product with
regard to possible changes and alterations
before use. In case of doubt you should
contact us for further information.
Target Air Rifle
9003 Premium Compressed Air
Technical data:
Caliber: 4.5 mm / .177
Barrel length: 64 cm/25.2"
Rifling: 42 cm/16.5"
Total length: 108 cm/42.5"
Sighting line: 77 cm/30.3"
Weight approx.: 4.5 kg/9,9 lbs
Version: Single loader
Propellant: Compressed air