Sony KLV-40ZX1M - Manual (Page 10)

10 US
2. Locating Inputs
~
• This unit displays all video input signals in a resolution of 1,920 dots × 1,080 lines.
1 Connect the AC power cord (supplied) to the AC IN jack and the HDMI cable (supplied) to the HDMI
IN jack on the rear of the unit, then use the hooks to store them in the back of the Table-Top Stand.
2 Hang the stand cover over the top of the Table-Top Stand’s center post, and then push down to close
until you hear a click.
~
• To avoid pinching the AC power cord and the HDMI cable, ensure that these cables run under the notches on
either side of the stand cover.
3 Attach the terminal cover (supplied) to the unit.
Item Description
1 AC IN Connects to your power source. Connect the supplied power cord to AC IN and the
nearest wall outlet.
2 HDMI IN HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between this LCD Monitor and any HDMI-equipped A/V
equipment. HDMI supports enhanced, or high-definition video, plus digital audio.
Connecting the AC Power Cord and HDMI Cable
Hooks
Hooks
Stand cover Terminal cover
Notch
Center post
Stand cover