Sony PCG-FX370P - Manual (Page 49)

Connecting a Port Replicator
49
To remove your notebook from the port replicator
1 Turn off your notebook and the connected peripherals.
2 Pull the levers on each side of the port replicator to disengage the notebook
from the port replicator.
3 Lift the notebook away from the port replicator.
4 Close the port replicator connector cover on the bottom of your notebook.
Disengaging notebook from port replicator
Lifting notebook
Close the port replicator connector cover after removing your notebook
from the port replicator. If the cover is left open, dirt may get inside and
damage the notebook.
Lever