Panasonic KXTG7150EX - Manual (Page 10)

Preparation
10
Displays
Display icons
*1 Voice mail users only
Connections
When connecting the AC adaptor to the
base unit, a short beep will be heard. If it is
not heard, check the connections.
Note:
L
When connecting the telephone line cord
to the telephone network, use the included
telephone line cord or telephone plug
appropriate to your country, noted on
page 4.
L Never install telephone wiring during a
lightning storm.
L
The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
L
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
Location
L
For maximum distance and noise-free
operation, place your base unit:
Display
icon Meaning
w
Within range of a base unit
L When flashing: Handset
is searching for base unit.
(out of range of base unit,
handset is not registered
to base unit, no power on
base unit)
L Handset is accessing base
unit. (intercom, paging,
changing base unit
settings, etc.)
k Handset is on an outside
call.
5 Battery strength
[2] Handset number (Standby
display setting, page 19)
0 New voice mail message
received
*1 (page 24)
Line is being used by
another handset.
Use only the included AC
adaptor and telephone
line cord.
(220–240 V, 50 Hz)
To telephone
network
Hook
TG7150-7170EX(e).book Page 10 Thursday, August 10, 2006 10:40 AM