Panasonic KXTG7150EX - Manual (Page 22)

Base Unit Settings
22
Base unit settings
L
Use the handset to customise the base unit.
L
When customising the base unit, the current item or setting is indicated by >.
To customise the base unit:
1
{j
/OK}
2 Press {^} or {V} to select “Base Unit Setup”. i {>}
3 Press {^} or {V} to select the desired item in the base unit settings menu. i {>}
4 Press {^} or {V} to select the desired item in the sub-menu. i {>}
5 Press {^} or {V} to select the desired setting then press {>} or follow the instruction in the
rightmost column of the chart.
L
To exit the operation, press {ih}.
*1 Change the recall time, if necessary, depending on the requirements of your service
provider/telephone company or PBX.
*2 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN
to you. If you forget your PIN, consult your nearest Panasonic service centre.
Base unit settings
menu Sub-menu Feature (default setting)
Ringer Volume — Base unit ringer volume (Medium)
Call Options Recall/Flash Change the recall time (“100 msec.”).
*1
Other Options Base Unit PIN Change base unit PIN (“0000”). *2
– Enter the current 4-digit base unit PIN.
i Enter the new 4-digit base unit PIN.
i {j/OK}
Repeater Mode (“Off”): page 26
TG7150-7170EX(e).book Page 22 Thursday, August 10, 2006 10:40 AM