Remote control – Panasonic CSE18MKEW User Manual

Page 6

Advertising
background image

6

REMOTE CONTROL

AUTO

COMFORT

MODE

POWERFUL/

QUIET

TEMP

OFF/ON

PATROL/

TIMER

SET

CANCEL

ON

OFF

1

2

3

AIR SWING

FAN SPEED

MILD DRY

COOLING

SET CHECK

CLOCK

RESET

AC

RC

MILD

DRY

FAN

SPEED

AIR

SWING

AUTO

HEAT

COOL

DRY

3

10

6

2

5

1

Remote

Control display

9

4

8

INDICATOR

PATROL SENSOR

(Blue)

POWER

(Green)

TIMER

(Orange)

(Green)

AUTO COMFORT

(Green)

(Blue)

POWERFUL/QUIET

(Orange)

Maximum

distances: 8m

Press the remote control’s button

1

TO TURN ON OR OFF THE UNIT

• Please be aware of the OFF indication on the remote

control display to prevent the unit from starting/stopping

improperly.

2

TO SET TEMPERATURE

• Selection range: 16°C ~ 30°C.

• Operating the unit within the recommended temperature

could induce energy saving.

HEAT mode : 20°C ~ 24°C.

COOL mode : 26°C ~ 28°C.

DRY mode : 1°C ~ 2°C lower than room temperature.

3

TO SELECT OPERATION MODE

AUTO mode - For your convenience
• During operation mode selection the power indicator

blinks.

• Unit selects operation mode every 10 minutes according

to temperature setting and room temperature

(For single Split System).

• Unit selects operation mode every 3 hours according to

temperature setting, outdoor and room temperature

(For Multi split system).

HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power indicator blinks

during this operation.

COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to

reduce power consumption during cool mode.

DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling

operation.

4

TO SELECT FAN SPEED (5 OPTIONS)

FAN SPEED

• For AUTO, the indoor fan speed is automatically adjusted

according to the operation mode.

5

TO ADJUST AIRFLOW DIRECTION (5 OPTIONS)

AIR SWING

• Keeps the room ventilated.

• In COOL/DRY mode, if AUTO is set, the louver swing

left/right and up/down automatically.

• In HEAT mode, if AUTO is set, the horizontal louver fi x at

predetermined position. The vertical louver swing left/right

after the temperature rises.

7

Human activity

sensor and

indicator

Advertising