Salton, Inc AC1875PROHD - Manual (Page 10)

9
USER MAINTENANCE
INSTRUCTIONS
Storage
While not in use, turn the Hair
Dryer OFF, unplug the Hair
Dryer, allow to cool completely,
and store out of the reach of
children in a safe, dry location
or inside the wall mount. Never
store it while it is hot or still
plugged in. Never wrap the cord
tightly around the appliance.
Never hang the Hair Dryer by
the cord. Handle the cord
carefully for long life, and avoid
jerking, twisting or straining
especially at plug connections.
Maintenance
ATTENTION: Before cleaning or
maintenance is done to the
Hair Dryer, turn the Hair
Dryer OFF and unplug.
Your Hair Dryer is virtually
maintenance-free. No
lubrication is needed.
If any malfunction occurs, do
not try to repair it yourself.
Unplug the appliance, allow it
to cool and call Consumer
Service for examination and
repair (See Warranty Section).
This appliance has no user
serviceable parts.
Cleaning the Dryer
Keep all vents and openings clear
of dirt or dust. Should dirt or oils
accumulate on the Hair Dryer,
unplug the unit and wipe the
exterior with a damp cloth. Allow
to dry completely before use.
Cleaning the Air Filter
and Air Intake Vent
From time to time, check the Air
Filter and Air Intake Vent for lint
build up. Cleaning the Filter and
Vent helps to prevent the Hair
Dryer from overheating.
The Filter is located at the back
of the Hair Dryer. To remove the
Filter Cover, hold on to the Hair
Dryer handle and lift the tab at
the base of the Filter Cover with
the thumb of your other hand
until it releases. Locate the tab
at the top of the Filter Cover and
slide the tab away from the Hair
Dryer to remove the Air Filter
Cover. (See Figure A.)
Use a small dry cloth to remove
build-up from the Air Filter and
Filter Cover.
Figure A
Removing the Air Filter Cover
AC1875PROHD_IB_13-2-03 2/13/03 12:35 PM Page 10