Salton, Inc AC1875PROHD - Manual (Page 9)

8
3 Position Heat Switch:
High, Medium, and Low
Depending on your styling needs,
the Hair Dryer can be set any of
the 3 Heat Settings. For your
reference, the settings can be
used for the following instances:
High
• Removing excess moisture
from the hair.
• Straightening coarse
textured hair.
• Heating hair set with
velcro rollers.
Medium
• General purpose drying.
• Smoothing medium - fine
textured hair.
Low
• Drying fine textured hair.
• Drying chemically treated or
damaged hair.
• Setting the hair after thermal
styling (i.e. velcro rollers, hot
rollers)
3 Position Power Switch
• High and Low Airspeed
settings, and Power OFF.
OPERATING THE DRYER
1. Plug the Hair Dryer into an AC
electrical outlet.
2. Test the ALCI Safety Device.
3. Choose the desired Heat
setting.
4. Set the Airspeed Switch to
High or Low to begin drying.
5. Remove moisture from the
hair by moving the Hair Dryer
back and forth around your
hair (keeping at least 2 inches
away from the hair). Keep the
Hair Dryer in motion at all
times to avoid hair damage.
6. For a smooth or rounded
look, you may want to use a
styling brush before hair is
completely dry. The
Concentrator is helpful in
directing the airflow for
better control when using
sections or a styling brush.
7. When finished styling, slide
the Airspeed Button to the
OFF position and unplug the
Hair Dryer.
8. Allow the Hair Dryer to cool
completely before storing.
CAUTION: While the Hair Dryer is
operating, never obstruct the
air inlet or outlet openings
and do not place appliance on
any surface.
AC1875PROHD_IB_13-2-03 2/13/03 12:35 PM Page 9